Product Description It is white high-quality ceramic fiber refractory mud.   Application range Runner funnel lining, diverter plate for continuous casting or horizontal casting; Inner lining of heat treatment furnace; The lining material of the batching furnace; Mouth Gravity casting pouring, riser area; Lining of ladles, spoons, etc.; Suitable for any part where minimum temperature drop is required.   Application method First dip the trowel in water to avoid sticking to the refractory material, then mold the refractory mud on the surface of the metal or refractory material to the required thickness and smooth the surface mud. 10 mm thick, dry 30- 60 minutes, if the thickness is greater than 30 mm, the drying time should be more than 3 hours. Therefore, the refractory mud is thixotropic. Before use, please take out the whole bag of refractory mud in the bucket, or pull it out and put it into another bag, and gently hit the bag with a mallet until it becomes soft,for easy to use.   Product advantages Reduce the temperature drop of molten metal, not wet aluminum, not wet zinc. Easy to operate and easy to dry with a burner.   Product Specifications Color appearance: white paste Bulk density: paste: 1.25g/cm 0.7g/cm after drying Thermal conductivity: 0.1Kcal/h.*℃(500℃) Maximum refractoriness: 1200℃ Linear shrinkage: 0.7% (800°C, dry for 1 hour) Transverse bending strength: 20-30Kg/cm2 Storage: Store in a dry and ventilated place Shelf life: six months